Taylor-Dunn BurdenMaster B 2-00, Руководство по эксплуатации, устранению неисправностей и замене запасных частей

Страница: 23 / 266

SAFETY RULES AND OPERATING INSTRUCTIONS
Safety Rules
Page 11
NOTE: Most faults are a result of a fault in the control
system that will require service by a qualified
technician. These faults are shown here for
reference only.
Operator correctable faults are shown in
bold and underlined.
Fault Code Tables
Level 5 Faults
Fault Code Description What to do
F05000 Contactor Over Current Refer to service technician
F05001 Controller Fault Refer to service technician
F05002 Configuration Error Refer to service technician
F05003 Internal Fault Refer to service technician
F05004 VA Fail Refer to service technician
F05005 Data Layer Fault Refer to service technician
F05006 MOSFET Short Refer to service technician
F05007 Power Up Fault Refer to service technician
F05008 Line Contactor Short Refer to service technician
F05009 Wiring/Motor Short Refer to service technician
F05010 Power Up Fault Refer to service technician
F05011 Drive 0 ON Refer to service technician
F05012 Drive 1 ON Refer to service technician
F05013 Drive 0 OFF Refer to service technician
F05014 Drive 1 OFF Refer to service technician
F05015 Drv 0 MOSFET Trip Refer to service technician
F05016 Drv 1 MOSFET Trip Refer to service technician
F05017 Traction ON Refer to service technician
F05018 Traction OFF Refer to service technician
F05019 MOSFET Short_L Refer to service technician
F05020 Power Up Fault Refer to service technician
F05021 Traction Welded Refer to service technician
F05022 Traction MOSFET Refer to service technician
F05023 Auto Zero Refer to service technician
F05024 Drive 0 ON L Refer to service technician
F05025 Drive 1 ON L Refer to service technician
F05026 Drive 0 OFF L Refer to service technician
F05027 Drive 1 OFF L Refer to service technician
F05028 0 MOSFET trip L Refer to service technician
F05029 1 MOSFET trip L Refer to service technician
F05030 Traction ON L Refer to service technician
F05031 Traction OFF L Refer to service technician
F05032 MOSFET Short R Refer to service technician
F05033 Power Up Fault Refer to service technician
F05034 Traction Welded Refer to service technician
F05035 Traction MOSFET Refer to service technician
F05036 Auto Zero R Refer to service technician
F05037 Drive 0 ON R Refer to service technician
F05038 Drive 1 On R Refer to service technician
F05039 Drive 0 OFF R Refer to service technician
F05040 Drive 1 OFF R Refer to service technician
F05041 0 MOSFET Trip R Refer to service technician
F05042 1 MOSFET Trip R Refer to service technician
F05043 Traction ON R Refer to service technician
F05044 Traction OFF R Refer to service technician
F05045 Stack Corrupt Refer to service technician
F05046 Open Contactor Refer to service technician
Level 4 Faults
Fault Code Description What to do
F04000 Open Contactor Refer to service technician
F04001 Contactor Welded Refer to service technician
F04002 Steer POT Fault N/A
F04003 Sequence Fault Start up switches were not
operated in the correct
order. Refer to
Vehicle
Operation Guidelines for
correct sequence.
F04004 F&R Fault Refer to service technician
F04005 F&R Fault Direction was selected
before start switch was
closed. Place direction
selector in the OFF position
and restart.
F04006 Interlock Fault Seat or foot interlock switch
not closed.
F04007 Inch Switch Fault F&R switch NOT in neutral.
F04008 Steer Fault Refer to service technician
F04009 Low Battery Volts Extreme low battery voltage
at the controller. May be a
result of severely
discharged battery or
wrong battery installed.
Confirm that the correct
battery is installed and
charge the battery.
F04010 High battery Volts Refer to service technician
F04011 Out of Range Fault Refer to service technician
F04012 CRC Fault Refer to service technician
F04013 Capacitor Fault Refer to service technician
Level 2 Faults
Fault Code Description What to do
F02000 Throttle Fault Occurs if throttle control
voltage is high at start
up indicating that the
throttle pedal was
depressed when the
start switch was closed.
If the pedal was not
depressed, then refer to
qualified service
technician.
F02001 Throttle Fault
F02002 Belly Switch Fault Refer to service technician
F02003 Open Field Refer to service technician
F02004 Open Field L Refer to service technician
F02005 Open Field R Refer to service technician
Level 1 Faults
Fault Code Description What to do
F01000 P/S Motor Overheated Stop the vehicle and allow
the system to cool down.
F01001 Motor Brush Fault Refer to service technician
F01002 Pump Motor Brush Fault Refer to service technician
F01003 P/S motor Brush Fault Refer to service technician
F01004 Low Battery Volts Batteries are empty and
require charging. If this
fault does not reset after the
charge cycle is complete
then there may be a
problem with the charger or
batteries.
Refer to qualified service
technician.
F01005 Controller Overheated Stop the vehicle and allow
the system to cool. This
could be a result of an
overloaded vehicle.
F01006 Traction Motor Hot Stop the vehicle and allow
the system to cool down.
This could be a result of an
overloaded vehicle
F01007 Pump Motor Overheated Stop the vehicle and allow
the system to cool down.
F01008 Wiring fault Refer to service technician