TAVRIDA ELECTRIC ISM_LD Series, Инструкция по применению

Страница: 16 / 70

16
2
Storage
Should immediate installation not be possible, the ISM and CM shall be stored in the original packing under the
following conditions:
· The ISM is switched off.
· Dessicants must be placed in the packing.
· Storage must be dry, well ventilated and the room temperature should be between - 40°C and + 40°C
· If several ISM are stacked a maximum of two vertical layers is permitted.
· If several CM are stacked a maximum of 10 vertical layers is permitted.
If CM are stored longer than one year, the built-in capacitors shall be charged according to the following procedure before
putting into operation:
· Switch On auxiliary power supply to CM for 20 seconds.
· Switch Off auxiliary power supply to CM for one minute.
· Repeat the described switching on and off procedure two times.
· Switch On auxiliary power supply to CM for at least 8 hours.
2 1 3
3 2 1
6 5
1
4
3
2
Arrangement of the labels (Figure 18, Figure 19):
ISM
1. Rating plate
2. Serial number
3. Warranty Seal
CM
1. Seal
2. Serial Number, date of manufacturing
3. Product code
Figure 19
Labelling three-phase ISM Labelling single-phase ISM
Figure 20
Labelling of the CM1501
2 1 3
3 2 1
6 5
1
4
3
2
The manufacturer accepts no warranty for a device if the seal is broken or has been removed.
2
3
1