Taurus TTA-11241, Инструкция по эксплуатации, Страница: 16 / 24

Assembly (Cont.)
Mounting the worktable:
•
Insert the worktable support bar into
the h o l d
(Fig.
11
A).
•
Position the worktable no further than
1.6mm from the sanding surface (Fig.
11
B).
•
T ig hten the hex set screw with the
spanner
(92) (Fig.
11
C).
•
Make sure the worktable hex screw is
fully secured.
Fig.llA
Fig. 11 B
Fig.11C
After Sales Support
Tel: 1300-355-255
14