Taurus TT-CW 18 Li, Инструкция по эксплуатации

Страница: 11 / 16

11
After Sales Support EMAIL: service.australia@einhell.com TEL: 1300 922 271
4.1 CORDLESS IMPACT DRIVER
SAFTEY RULES
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or serious
injury.
Keep all safety regulations and instructions in a safe place
for future use.
Hold the equipment by the insulated handles when
carrying out work during which the screw or the plug-in
tool could strike concealed power cables. Contact with a live
cable may also make the metal parts of the equipment live
and cause an electric shock.
Ensure that the tool is switched off before
you insert the battery. Inserting a battery into
an electric tool that is switched on can cause
accidents.
4.2 LAYOUT (FIG. 1)
1. Bit chuck
2. Forward/ Reverse switch
3. ON/OFF switch
4. Battery pack
5. Pushlock button
6. LED
4.3 ITEMS SUPPLIED
• Open the packaging and take out the equipment with
care.
• Remove the packaging material and any packaging and/
or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport
damage.
• If possible, please keep the packaging until the end of the
warranty period.
IMPORTANT
The equipment and packaging material are not toys. Do not
let children play with plastic bags, foils or small parts. There
is a danger of swallowing or suffocating!
CONTENTS
• 1 x Cordless impact driver
• 1 x Battery charger
• 2 x Battery pack
• 1 x Instruction Manual
• 1 x Quick Start Guide
• 1 x Warranty Card
• 1 x Warranty Sticker
4.4 PROPER USE
The cordless drill/screwdriver is designed for tightening and
undoing screws, as well as for drilling in wood, metal and
plastic.
The machine is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user
/ operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for
use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equivalent
purposes.
4.5 TECHNICAL DATA
Voltage supply: 18 V d.c.
Idling speed: 0-2200 rpm
Number of impact: 0-3300 bpm
Bit chuck: 1/4“ (6.35 mm)
Forward and reverse rotation: yes
Screw bit length: 50 mm
Sound and vibration
Sound and vibration values were measured in accordance
with EN 60745.
LpA sound pressure level:
84.13 dB(A)
KpA uncertainty: 3 dB
LWA sound power level: 95.13 dB(A)
KWA uncertainty: 3 dB
Caution - Read the operating instructions to
reduce the risk of injury
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
Wear a breathing mask.
Dust which is injurious to health can be
generated when working on wood and other
materials.
Never use the device to work on any materials
containing asbestos!
Wear Safety goggles.
Sparks generated during working or splinters,
chips and dust emitted by the device can cause
loss of sight.