Taurus TF-WS7-ATT Скачать руководство пользователя страница 57

Страница: 57 / 80

STORAGE AND TRANSPORT

4.1

General Instructions

⚠

WARNING

The storage location should be chosen so that improper use by third parties or children can

be prevented.

࣑

ATTENTION

Make sure that the equipment is protected from moisture, dust and dirt in the selected

storage location. The storage location should be dry and well ventilated and have a constant

ambient temperature between 5°C and 45°C.

TROUBLESHOOTING, CARE AND MAINTENANCE

5.1

General Instructions

⚠

WARNING

Do not make any improper changes to the equipment.

⚠

CAUTION

Damaged or worn components may affect your safety and the life of the equipment.

Therefore, immediately replace damaged or worn components. In such a case, contact the

contract partner. The equipment must not be used until it has been repaired. If necessary,

use only original spare parts.

࣑

ATTENTION

In addition to the instructions and recommendations for maintenance and care given here,

additional service and/or repair work may be necessary; this must only be carried out by

authorised service technicians.

Содержание TF-WS7-ATT

















































































Результаты поиска

Содержание TF-WS7-ATT

Отзывы:

Бренды по названию

Популярные бренды

Taurus TF-WS7-ATT, Руководство по сборке и эксплуатации

Результаты поиска

Содержание TF-WS7-ATT

Отзывы:

Бренды по названию

Популярные бренды