Taurus TF-UB10.5, Руководство по сборке и эксплуатации

Страница: 14 / 48

UB10.5 Pro
14
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assemble Base Feet
1. Mount four adjusting screws (19) each on the front base foot (2) and rear base foot (3).
2. Make sure that the adjusting screws (19) are tightly attached to the base feet.
3. In order to be able to mount the base feet easier, we recommend placing one of the pieces of
Styrofoam under the frame (1).
4. Mount the front base foot (2) on the frame (1) with two washers (76), two spring washers (74)
and two screws (99).
5. Mount the rear base foot (3) on the frame (1) with two washers (76), two spring washers (74)
and two screws (99).