29
3.3.6
Watt programme
1. Tap “WATT MODE” in the main menu.
2. Set your desired target wattage and training time.
L
NOTICE
You can set a wattage value between 10 and 350 watts (in increments of 10). The default value
is 120.
You can enter the training time between 5 and 999 minutes. The default value is 20 minutes.
3. To start the programme, press START.
The upper left corner of the screen shows the target wattage.
The upper right corner of the screen shows the current wattage.
The target wattage can be adjusted in increments of 5 during the programme by tapping WATT - / WATT +.
The resistance cannot be adjusted manually, but is automatically adjusted according to the target
wattage and RPM.
4. To pause the programme, press STOP.
5. To end the programme, press STOP once again.
