Taurus TF-QT1032, Руководство по сборке

Страница: 12 / 28

8
8
9
9 10
10
2
7
3
1
6
5
12
Core Trainer
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Assembly of the Base Frame
1. Attach the plate poles (5) to the base frame (1).
2. Slide one rubber washer (6) over each of the plate poles (5).
3. Screw the plum blossom screw (7) into the roll sleeve (3).
4. Attach the roll sleeve (3) to the rotate set (2) with one bolt (8), two washers (9) and one lock nut
(10).
5. Attach the rotate set (2) to the base frame (1) with one bolt (8), two washers (9) and one lock
nut (10).