Taurus Super-S Combo User Guide
If the system
ise
g
tem.
doesn’t recogn
the drive, turn on
the power first,
before connectin
the interface cable
or connect the
device before
booting your
Operating Sys
Installation on a PC
Before connecting the device, setup the RAID mode using the
selector switch at the back of the enclosure.
If the drives have been pre-installed and setup already, you do
not need to change anything, unless you prefer a different
setup.
Turn on your Computer and start Windows.
Connect the Taurus and turn it on.
Let Windows search and install the driver automatically.
Open “My Computer” to see your external hard drive.
Note: For more info about formatting, see “Partitioning &
Formatting”.
Remove Procedure
For the safe removal of your drive and to assure that no data is
lost, always follow the correct unplug procedure. Otherwise, an
error message will appear.
Click on the taskbar icon for external hardware
Choose your external hard drive and confirm to remove it
Page 9 / Chapter 3 - System Set Up
