The Stomp−Head 1.Vintage
MTD (Master Tube Design) technology.
is dedicated to supporters of single−purpose amplifiers and prefer a
vintage like type of sound.
The amp is based on a
It is our own groundbreaking
technology which permits us to create powerful guitar amplifiers in very compact shapes. This technology
uses all the significant features of tubes which determine the warm, classic sound of guitar amps. We offer
players an amplifier with extremely light weight, very compact dimensions and powerful sound. The sound
characteristics and power of the amplifiers based on our MTD technology are equal to the classic tube amps
with the same power rating.
To abtain required parameters, the amplifier is driven by a much higher rated power amp. Even though
the power of the amplifier is set at 50Watts RMS, in reality the real power of the amp is 100 Watts.
The SH 1.VT is also equipped with a power selector allowing the player to use the amp in two different
power ratings of 50 and 25 Watts RMS. It is also designed to auto adjust itself to different speaker
impedance. The amp handles the speakers with 4, 8, and 16 Ohm of impedance.
The Stomp−Head 2.VT features a classic, three point EQ ( BASS, MIDDLE, TREBLE), PRESENCE, DRIVE and
REVERB. The amplifier is characterized by very smooth, warm sound with soft compression and long
sustain.
The Stomp−Head can also be used as a guitar preamp. LINE OUT with a Speaker Cabinet Simulation permits
the player to connect independently the preamps to a mixer or an external power amp. The Speaker
Cabinet Simulation imitates the sound of the CELESTION Vintage 30 cabinet. The amp is also equipped with
a serial EFFECT LOOP.
FRONT PANEL
SPECIFICATIONS
Power output: 50 W / 4−8−16ohm
Power brake to 25Watt
Auto detection speakers impedance
Tubes: 12AX7
1 channel
FOOT SWITCHES − MUTE and REVERB
Controls:
BASS, MIDDLE, TREBLE, PRESENCE, DRIVE, REVERB, VOLUME
Serial effect loop
LINE OUTPUT with speaker simulation
Universal AC input range 90−260V/AC 50−60Hz
Dimensions: [H x W x D] 90 x 160 x 190 mm
Weight: 1,3kg
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
−
−
−
− LINE OUTPUT with speaker cabinet simulation
−
−
−
− REVERB control
−
− DRIVE
− PRESENCE
rol
−
− VOLUM
−
−
−
− REVER
− A
. Range: 90−260V / 50−60Hz
−
−
[20]
INPUT
Effect−loop SEND
Effect−loop RETURN / PA input
Speakers output / impedance: 4−8−16ohm [auto detect. impedance]
BASS control
MIDDLE control
TREBLE control
control
cont
REVERB control.
E control
Power selector: 50Watt/25Watt
LED indicator of the selected channel
MUTE
C POWER input
FUSE 2A
POWER on/off switch
foot−switch
foot−switch
Signal can be lead in different ways: with simulation, without simulation or both − see Fig.A.
.
DRIVE
PRESENCE
INPUT
SEND
RETURN
LINE OUT
SPEAKER
4-16ohm
EFX
EFX
BASS
REVERB
TREBLE
MIDDLE
5
4
3
2
1
6
7
8
1
1
2
3
4
2
3
4
1
1
2
3
4
2
3
4
1
1
2
3
4
2
3
4
1
1
2
3
4
2
3
4
VOLUME
5
4
3
2
1
6
7
8
5
4
3
2
1
6
7
8
25W
Stomp-Head
MASTER TUBE
DESIGN
RANGE
50W
1
2
3
8
4
5
18
19
20
6
7
9
11
10
13
12
15
16
17
14
100W/rms
power stage INSIDE
REVERB
2
