Taurus SEBR7132, Руководство по сборке и эксплуатации

Страница: 24 / 56

Elite Trainer
24
Step 9: Assembly of the Barbell Bar
1. Insert the barbell bar (18) into the
designated slots of the sliding sleeves
(17). Shove the sliding sleeves (17) over
the guide bars (19).
L
NOTICE
Ensure that the internal threads of the
guide bars (19) are on the upper side.
2. Shove one rubber cushion (13) over
each ending of the guide bars (19).
3. Place the socket set (20) on the main
frame (1) and insert the guide bars (19)
into the socket set (20).
L
NOTICE
Ensure that the postion of the barbell
bar (18) is the same as shown in the
figure below.
4. Mount the guide bars (19) on to the
main frame (1) using one Φ10 waher
(48) and one M10*70 hexagon bolt
(45) for each side.
5. Fix the barbell bar (18) on both sides of
the sliding sleeves (17) with each one
inner washer (21), one hexagon bolt
(41) and one end cap (22).