7
After Sales Support TEL: 1300 922 271 EMAIL: [email protected]
15.
Always remove keys and wrenches
after use.
Before switching on, make sure
that all keys and wrenches have been
removed from the tool.
16.
Avoid unsupervised operation.
Never carry mains-powered tools with your
finger on the switch. Make sure the switch is
OFF when connecting the tool to the mains.
17.
Outdoor use of extension cables.
For outdoor use, only use approved and
appropriately labelled extension cables.
18.
Be alert at all times.
Observe your work. Work carefully. Never
use the electric tool when you are
distracted.
19.
Check the appliance for damage.
Before using the equipment further, check
that safety equipment or slightly damaged
parts are in good working order and function
correctly. Check that the moving parts are
working correctly, that they do not jam, and
that no parts are damaged. Make sure that
all parts are fitted correctly, to ensure that
the equipment remains safe to use.
Damaged safety devices and parts must be
repaired or replaced by experts in a
customer service workshop, unless
otherwise stated in the manual. Damaged
switches must be replaced by a customer
service workshop. Do not use equipment for
which the on-off switch does not correctly
function.
20.
Important!
For your own safety, only use accessories
and auxiliaries which are stated in the
operating instructions or which have been
recommended or indicated by the
manufacturer. Use of any other attachments
or accessories than those stated in the
operating instructions or in the catalogue
could lead to personal injury.
21.
Repairs should only be done by an
expert.
This electric tool complies with the
pertinent safety regulations. Repair work
may only be carried out by an electrician.
Otherwise there is a risk of accidents for the
operator.
22.
Attach the dust extraction system.
If there are apparatuses available for the
attachment of the dust extraction system,
make sure these are connected and used.
2. Layout
1.
Additional handle
2.
Operating switch
3. Speed controller
4. Handle
5. Dust container
6.
Rectangular sanding/grinding plate
7.
Eccentric sanding/grinding plate
8.
Triangular sanding/grinding plate
9.
Punch for sanding/grinding paper
10. Chip extractor adapter
11. Allen key
3. Proper use
The equipment is designed for the
grinding/sanding of wood, iron, plastic and
similar materials using the appropriate
grinding/sanding paper. The machine is not
suitable for wet grinding/sanding.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
