The yellow and red LED illuminate:
The battery has an adequate remaining
charge.
Red LED:
The battery is empty, recharge the battery.
6.7 Changing the tool (Fig. 5)
Important!
Set the changeover switch to its
centre position whenever you carry out any
work (for example changing the tool,
maintenance work, etc.) on the cordless
screwdriver.
Insert the bit (14) into the bit chuck (1).
To remove the bit (14), pull it back out of the bit
chuck (1).
6.8 Screwdriving
We recommend using self-centering screws
(e.g. Torx screws, recessed head screws)
designed for reliable working. Be sure to use a
bit that matches the screw in shape and size.
Set the torque, as described elsewhere in
these operating instructions, to suit the size of
screw.
7. Cleaning, maintenance and
ordering of spare parts
Always pull out the mains power plug before
starting any cleaning work.
7.1 Cleaning
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
We recommend that you clean the device
immediately each time you have finished
using it.
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could
attack the plastic parts of the equipment.
Ensure that no water can seep into the
device.
7.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
7.3 Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part
required
For our latest prices and information please go
to www.isc-gmbh.info
8. Disposal and recycling
The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is
raw material and can therefore be reused or
can be returned to the raw material system.
The unit and its accessories are made of
various types of material, such as metal and
plastic. Defective components must be
disposed of as special waste. Ask your dealer
or your local council.
After Sales Support TEL: 1300 130 579 WEB: www.rossmac.com
11
Anleitung_RT_SD_3_6_Li_SPK7_GB:_ 30.07.2009 11:22 Uhr Seite 11
