- 11 -
Power Source Control Panel
1
Welding material selection button:
Select either
Steel , AlSi , AlMg ,
Stainless Steel , Cu.
The corresponding selection light is lit.
2
Welding process selection button:
Select either
MMA, GMAW , Pulse
MIG , Double pulse MIG
and
Spot welding
.
The corresponding selection
light is lit.
3
Wire diameter selection button:
Select either
0.8, 1.0, 1.2, 1.6.
The
corresponding selection light is lit.
4
Right menu option button:
Set values such as current, wire feed speed,
thickness, time; The value can be set when the corresponding light is lit.
5
Memory button:
Ten sets (0 - 9) of adjusted welding parameters can be
recalled and saved during each operation.
6
Save button:
Save the finished welding parameters
.
7
Right menu option button:
When this button is tapped, the following
selections are displayed successively and set when the corresponding
selection is lit -
front gas, inductance, burn-back voltage, burn-back
time, rear gas
and other related parameters.
8
Gas button:
Press and hold the gas button to start the gas flow inspection.
Releasing the button will stop the gas flow
.
9
Current adjustment dial:
Turn the dial to adjust the current output.
10
Operation mode selection button:
Select between the following four
14
15
4
5
9
10
6
7
13
8
1
2
3
11
12
