- 25 -
7.1 Installation of Steel Wire Guide-tube
①
Install the steel wire
liner into the welding
torch
②
Insert the wire guide
tube into the Euro
adapter
③
Set up the welding
torch into the Euro
adapter
7.2. Teflon Wire Liner Installation
①
Install the Teflon wire
liner into the torch leaving
approximately 60mm of
the liner outside the torch.
②
Set up the welding
torch into the Euro
adapter
③
Wire liner should be
left about 5mm outside
! Take care:
◆
Ensure the wire liner is not too tight or too loose else this will increase the
feeding resistance resulting in feeding instability.
◆
Ensure all torch quick-connectors are securely tightened. Loose connections
will cause a voltage drop resulting in overheated equipment.