Taurus LAURENT 25 CONVECTION, Руководство пользователя

Страница: 12 / 40

ENGLISH
The microwave oven Will switch to lock function
after one minute without operation and closed
door. To unlock, open and close the door.
After any operation, the microwave oven will show
End in the screen and will emit a sound Bee-bee-
bee-bee every two minutes until the food is
removed or any button pressed.
This microwave has predefined programs to cook
the next different kinds of food. For more
reference, please look at the table below.
To set an auto menu function:
-
In standby mode, turn the turning knob
anticlockwise.
-
Select the code of the menu according to the
food.
-
Press the start button to confirm.
-
Turn the turning knob to select the weight or
quantity (see table).
-
Push the start button to confirm and start.
Code. Menu: Selector Notes
A-01 Milk/Coffee 1 – 3 servings (Cups)
For Menus 07,08 and 09,
the microwave will stop half
way to turn the food over.
Turn the food and press
again the start button.
The result of the food will not
be always the same as it
depends of a lot of factors.
A-02 Rice 150g – 600g
A-03 Pasta 100, 200 o 300g
A-04 Potatoes 1-2 servings (230g/serve)
A-05 Auto-reheat 200g – 800g
A-06 Fish 200g – 600g
A-07 Cake 475g
A-08 Pizza 150, 300, 450g
A-09 Chicken 800g – 1400g
A-10 Beef Mutton 200g – 600g
A-11 Skewered meat 100g – 500g
Overheating protection
When the system enters into super high
temperature status, the digital display will show
E01 and beep continuously. After toubleshooting,
press pause/cancel and the system will come
back to normal.
Low temp protection
When the system enters to ultra low temperature
status, the display will show E02 and will continue
to beep. (When the system sensor is open
circuited, the display shows E04). Press
pause/cancel button and it will go back to normal.
Sensor malfunction protection
The system enters into protection when the
system sensor is short circuited (except
microwave). The display will shw E03 and
continue to beep. After pressing pause cancel, the
product should come back to normal.
-
Press the Cancel /Stop button twice.
-
Clean the appliance.