Taurus Iso Shoulder Press Sterling, Руководство по сборке и эксплуатации

Страница: 20 / 40

20
Shoulder Press
Step 5: Assembly of the Seat Frame and Pads

NOTICE
+ Do not tighten the screws and nuts completely yet.
+ Make sure that the seat frame (7) can be moved up and down smoothly. If needed, slightly
loosen the screws and nuts.
1. Attach the seat pad (37) to the seat frame (7) with two screws (58) and two fl at washers (64).
2. Attach the seat frame (7) to the back standing frame (4) with:
+ two idler wheels (29), two screws (48), four fl at washers (65) and two lock nuts (61).
+ one supporting sleeve (72), one screw (56), two fl at washers (64) and one lock nut (62).
3. Attach the back pad (35) to the back standing frame (4) with one screw (58), one screw (57) and
two fl at washers (64).
⚠ CAUTION
Carefully hold the pull spring (28) at the hooks.
4. Hook the pull spring (28) onto the supporting sleeve (72) and the back standing frame (4).
5. Tighten the screws and nuts with the appropriate tools.
6. Check that all screws and nuts are properly tightened and retighten if needed.
→
The assembly is completed.
Flat washer (64)
Screw (56)
Supporting sleeve (72)
Lock nut (62)
Seat frame (7)
Flat washer (64)
Pull spring (28)