Taurus Glamor Moving Spot 180, Руководство пользователя

Страница: 6 / 14

6
4.6 TO PREVENT BURNING OR FIRE
1. The fixture can't be mounted directly on the surface of ordinary combustible material.
2. Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
3. The equipment must be installed away from inflammable and explosive materials.
4. The equipment should be projected range of 3 meters away objects and projectiles
temperature less than 60 ° C; ---- 3.0m
5. Fan or ventilation, at least in the range of 0.5 meters can not have an obstacle.
6. Do not place any object on the lens.
7. Handling at least allow the fixture being cool for 20 minutes.
8. Do not replace the non-original parts.
4.7 LOCK FIXTURE DURING TRANSPORT
In order to protect the light, there is a protect lock; During the transport , the lock will closed
keeping the item in safety state.
4.8 ABOUT PACKING
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before clean the fixture, make sure pan/tilt protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock
the fly-case.
5. Fly-case only up stacked two layers. Forbid to upside down.
6. When packed with carton box, equipment should be put into the foam first, then set into
a carton, pay attention to the vertical position.
4.9 UNPACKING
Note: Before unpacking check the damage is whether due to the transportation or not, if
you find any such damage, please do not use this item, and contact with the dealer or
manufacturer as soon as possible.
1. Open the fly-case, and discover the inside plastic bag.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened pan/tilt lock!
Warming
Must use two pieces of clamps to fix the product and locked at 1/4 , the clamp can be
locked at its clockwise 90°. Plus one safety rope across form the hole on the bottom, but not the
handle.
Attention! One product only can accept one DMX input and one DMX output. DMX512 cable
must use the professional shielded twisted pair cable; standard loudspeaker cable is not reliable
to control the long-range data. 24AWG cable is suitable for more than 300 meters long-distance
signal transmission and must add DMX 512 signal amplifier. Do not use two outputs to separate
F