Taurus Glamor Moving Spot 180, Руководство пользователя

Страница: 5 / 14

5
4.SAFETY INFORMATION
Safety Warning: This product is only suitable for professional use, and does not apply to security
for other purposes. When you got the lights, please check the package whether have any damage
caused by transportation. If there is any damage, do not use this fixture, and please contact the
dealer or manufacturer as soon as possible. This product is only suitable for indoor, IP20
protection class. Lamps should be kept dry to avoid Moisture, overheating or dusty environment.
Prevent lamps come into contact with water or any other liquid. The use of this product should
pay attention to: fire, heat, electric shock, ultraviolet radiation, the lamp to explode or Shedding
caused serious or fatal injury. Please read the instructions before use energized or installing.
Follow through the operation of security methods and pay attention to the warning signs on the
specification and equipment.
4.1
ANTI-HIGH TEMPERATURE
ta =40°C
Please don’t use the equipment if the temperature above 40
℃
4.2 BURST PREVENTION
The lens should be changed if had damaged or any problems. Don’t change the non-original
manufacturer lens.
Len size
：
Φ76×10 mm
4.3 TO PREVENT FALLING WOUNDING
When Hang the fixture, please must verify that the facilities to be able to withstand at least
10 times or more weight of fixtures.
Please make sure the Mounting hardware is strong enough no any damage, and insurance
for the safety rope as auxiliary security fixed in other facilities will need to verify before
installation. Installing or removing the equipment, to make the pulley below the work location
4.4 UA PROTECTION
Forbid straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to rupture.
4.5 PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the
identified power, voltage and have an overload or leakage protection;
Each fixture must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Forbid using the fixture in storm or wet environment.