Taurus ergometer RB10.5 PRO, Руководство по сборке и эксплуатации

Страница: 16 / 52

16
RB10.5
Step 2: Mounting the front post
1. Slide the cover (11) up along the front post (17) (see fig. 2-1).
2. Connect the cables (64 & 65) and the cables (14 & 18) with one another (see fig. 2-2).
3. Insert the front post (17) into the main frame holder (1).
4. Connect the front post (17) with the main frame holder (1) with four bolts (15), four spring
washers (9) and four flat washers (16).
5. Slide the cover (11) down again (see fig. 2-4).
Step 3: Alignment of the feet
If the floor is uneven, you can stabilise the training equipment by turning the two adjustable screws
under the main frame.
1. Lift the equipment on the desired side and rotate the adjustable screws under the main frame.
2. Rotate the screws clockwise in order to unscrew them, therefore raising the equipment.
3. Rotate the screws counterclockwise in order to lower the equipment.