AFTER SALES SUPPORT
1300 922 271
MODEL NUMBER: E-MG 250E,
10/11
7
5. Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
6. Recommendation
We recommend that the tool always be supplied via
residual curtrent device with a rated residual current of
30 mA or less.
Additional safety instructions
•
This tool may only be used for dry grinding/
sanding operations.
•
Always guide the power cable away from the back
of the tool.
•
Use of the tool on materials containing asbestos is
prohibited.
•
Always remove the plug from the power supply
socket before carrying out any work on the
machine (cleaning the sander, changing the
sandpaper, etc.).
•
Always disconnect the machine by removing the
plug from the socket, not by pulling on the power
cable.
•
To protect your health, always wear safety goggles
and a dust mask during sanding work.
•
Keep your workplace clean and well illuminated.
•
Make sure that the workpiece is secured so that it
cannot slip.
•
Keep children away.
•
For your own sake, keep the machine clean at all
times and check it for signs of damage each time
after using it.
•
Make sure that the switch is set to OFF before you
insert the plug into the power supply socket.
•
Make sure of your footing, particularly when
working on ladders and platforms.
•
If you discover any damage to the machine, use
the exploded diagram and the spare parts list to
determine which parts need to be ordered from
Customer Service.
•
Important! Wear safety goggles and a dust
mask.
Do not lose these safety instructions
Important!
When using equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read
the complete operating manual with due care. Keep
this manual in a safe place, so that the information is
available at all times. If you give the equipment to any
other person, give them these operating instructions
as well. We accept no liability for damage or accidents
which arise due to non-observance of these instructions
and the safety information.
2. Layout (Fig. 1)
1.
ON/OFF switch
2.
Tool chuck
3.
Dust extraction adapter
4.
Speed controller
5.
Allen key for changing tools
6.
Saw Blade
7.
Scraper
8.
Triangular sanding/grinding plate
9.
Diamond saw blade
10. HSS saw blade
3. Items Supplied
•
Open the packaging and take out the equipment
•
with care.
•
Remove the packaging material and any packaging
and/or transportation braces (if available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until the
end of the guarantee period.
Important!
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or small
parts. There is a danger of swallowing or suffocating!
•
Multifunction Tool
•
Triangular sanding/grinding plate
•
Saw blade
•
Scraper
•
Dust extraction adapter
•
Allen key
•
6x Sanding paper
•
Diamond saw blade
•
HSS saw blade
•
User Guide
•
Quick Start Guide
•
Warranty Certificate
•
Warranty Card
•
Warranty Sticker
4. Proper use
The equipment is designed for the sanding/grinding
of wood, iron, plastic and similar materials using the
appropriate sanding/grinding paper. Furthermore, the
equipment is intended for sawing wood, plastic and
similar materials, as well as scraping off glued carpets,
filling compound residues, old paint and similar
applications.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
