Taurus Dual Pro Bicep Curl & Tricep, Руководство по сборке и эксплуатации

Страница: 18 / 44

No. Name Specification Qty.
38 Seat pad frame 1
75 Cable sets Φ4.8 1
95 Stop screw M10*18*Φ8 1
99 Spring washer M10 1
012 Pulley set Φ89*25.8 1
013 Pulley set Φ114*32 1
70 Wide pulley block Φ116*47 1
71 Pulley block Φ89*25.8 1
75 Cable set Φ4.8 1
18
Bicep Curl & Tricep
Step 4: Assembly of the Pulleys and Seat Pad Frame
L
NOTICE
+ The majority of the pulleys are pre-assembled when delivered. These pulleys need to be
disassembled in order to perform the cable routing.
+ The two pulleys (012 and 013) for the frame are not pre-assembled
1. Route the cable (75) over the pulley set (013) and assemble the pulley set (013) to the upper side
of the frame (001) and pulley baffle (004) with the pre-assembled screw (026), two flat washers
(031) and one nut (034-1).
2. Route the cable (75) down and under the pulley set (012) and assemble the pulley set (012) to
the lower side of the frame (001) with the pre-assembled screw (025), two flat washers (031) and
one nut (034-1).
3. Disassemble the pulley (70), route the cable (75) around and reassemble the pulley (70).
4. Disassemble the pulley (71), route the cable (75) around and reassemble the pulley (71).
5. Attach the lower cable end (75) to
the cam frame (35-2).
6. Fix the seat pad frame (38) to the
upright frame (39) with one spring
washer (99) and one stop screw (95).