ted to the charger.
INSTRUCTIONS FOR USE
USE:
-
Turn the appliance on, by using the on/off
switch. (B)
-The ON indicator lamp will light up. (C )
-Select the desired power.
-Slide one position for ECO speed / slide two
position for TURBO speed.
-To use the hand vacuum:
-Press the hand vacuum extraction button (H) on
the brush vacuum’s main body (E). (Fig. 2)
-
Turn the appliance on, by using the on/off
switch. (I)
INSERTING THE MOP
(*) Only on the Inedit 29.6 Wash model
-Fill the mop’s water tank with water and, if ne-
cessary, add a few drops of detergent.
-Attach the water tank to the back the vacuum
cleaner’s brush base so that it clicks into posi-
tion and press the button to open the passage
for the water (Fig.3b)
-The mop can also be used dry.
-NOTE: The mop is machine washable.
FITTING AN ACCESSORY TO THE HAND
VACUUM:
-Press the hand vacuum extraction button (H) on
the brush vacuum’s main body (E). (Fig. 2)
-The hand vacuum is designed in such a way
that it allows the following accessories to be
fitted: (use the combination that best meets your
requirements). (Fig.3)
-Furniture brush: Equipped with a brush at the
end, which brushes the surface as it is used.
-Crevice nozzle: Specially designed for getting
into cracks and difficult corners.
PARKING POSITION:
-This appliance has one parking position for
comfortable and straightforward storage.
FOLDING HANDLE:
-This appliance has a folded handle position for
easy storage. (Fig.4)
CLEANING
-Disconnect the charger from the mains and let it
cool before undertaking any cleaning task.
-Clean the appliance using a damp cloth with a
few drops of detergent and then dry it.
-Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
-Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
EMPTYING THE DUST BOX:
-Empty the vacuum deposit when dust is visible
though the transparent walls, when it is full, or
when the vacuum cleaner does not work to its
full potential.
-Press the hand vacuum extraction button (H) on
the brush vacuum’s main body (E). (Fig. 2)
-Disconnect the dust box from the appliance.
(Fig. 5)
-
Remove the cloth filter and its protector. (Fig. 6)
-Empty the contents into a suitable rubbish
container.
-
Clean the dust box filter.
-Attach the dust box to the appliance.
-To reassemble, follow the above instructions but
in reverse.
CHANGING THE FILTERS:
TO REMOVE FILTERS:
-Press the hand vacuum extraction button (H) on
the brush vacuum’s main body (E). (Fig. 2)
-Disconnect the dust box from the appliance.
(Fig 5)
-
Remove the cloth filter and its protector. (Fig. 6)
-
To reassemble the filter, proceed with the above
instructions, in reverse order.
-Cleaning the rotary brush:
TO REMOVE THE BRUSH:
-Turn the rotating button on the bottom of the
fitting to the left in order to release the brush.
(Fig. 7)
-Remove the brush and clean.
-To reassemble, follow the above instructions but
in reverse.
SUPPLIES
-Supplies can be acquired from distributors and
authorised establishments (such as filters, etc. )
for your appliance model.
-
Always use original supplies, designed specifi
-
cally for your appliance model.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
-Caution: It is important that the batteries are
fully discharged prior to its withdrawal from the
Downloaded by: pm-capetown on 19-09-2022 12:33 CEST
Содержание CROSSBACK 29.6 LITHIUM INEDIT 29.6 WASH
