Taurus CALF RAISE IT95, Руководство пользователя

Страница: 26 / 35

STEP 7
1. Attach two 4.5" Pulleys (#38) to the Weight Stack Frame ASSY (#13) using:
two M10*50 SHCS (#41) four Φ11*Φ20*2 Flat Washer (#52)
two M10 Nylon Lock Nut (#54)
2. Attach one end of Cable ASSY (#10) to the Top Plate (#17).
3. Attach one "V" Pulley (#36) and two Pulley Cover (#31) to the Main Frame ASSY (#1)
using:
one M10*65 SHCS (#42) one M10 Nylon Lock Nut (#54)
4. Attach one 6" Pulleys (#32) to the Support Frame ASSY (#3) using:
one M10*50 SHCS (#41) one M10 Nylon Lock Nut (#54)
two M6*35 CRPHS (#50) two Φ11*Φ20*2 Flat Washer (#52)
5. Attach another end of Cable ASSY (#10) to the the Main Frame ASSY (#1).
Note: Wrench tighten bolts and Nylon Lock Nuts.
Step 8
Tips: Pre-assemble eight Cross Recessed Pan Head Screws into the Weight Stack Frame
ASSY and Bottom Bracket ASSY, not wrench tighten Bolts, Assemble the shroud with the
bolt on.
1. Attach the Front Shroud (#22) and the Left Front Shroud (#23) to the Weight Stack
Frame ASSY (#13) and the Bottom Bracket ASSY (#15) using:
four M6*20 CRPHS (#49) two M6*16 CRPHS (#48)
2. Attach the Rear Shroud (#24) to the Weight Stack Frame ASSY (#13) and the Bottom
Bracket ASSY (#15) using:
four M6*20 CRPHS (#49) two M6*16 CRPHS (#48)
3. Attach the Training Placard Cover (#20) to the Weight Stack Frame ASSY (#13) and the
Top Bracket ASSY (#14) using:
two M6*20 CRPHS (#49) two M6*10 CRPHS (#47)
4. Attach the Top Rear Shroud (#21) to the Weight Stack Frame ASSY (#13) and the Top
Bracket ASSY (#14) using:
four M6*20 CRPHS (#49)
5. Attach the Top Cover (#19) to the Weight Stack Frame ASSY (#13) using:
two M6*20 CRPHS (#49) two Spout Plug Φ16.5*6.88 (#28)
Assembly
26