AFTER SALES SUPPORT
1300 922 271
MODEL NUMBER: BT-RH1500, 08/11
7
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level
92 dB(A)
K
pA
uncertainty
3 dB
L
WA
sound power level
103 dB(A)
K
WA
uncertainty
3 dB
The hammer drill is not designed for outdoors use as
specified I Article 3 of Directive
2000/14/EC_2005/88/EC.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with
EN 60745.
Hammer drilling in concrete
Vibration emission value a
h
= 16.885 m/s
2
K uncertainty = 1.5 m/s
2
Chiselling
Vibration emission value a
h
= 15.773 m/s
2
K uncertainty = 1.5 m/s
2
Important!
The vibration value changes according to the area of
application of the electric tool and may exceed the
specified value in exceptional circumstances.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect working
order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
5. Before starting the
equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
Check the drilling point for concealed electrical
cables, gas and water pipes using a cable/pipe
detector.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig 1)
1.
Dust guard
2.
Locking sleeve
3.
Rotary switch for rotation stop facility
4.
ON/OFF switch
5.
Rotary switch for hammer stop facility
6.
Additional handle
7.
Depth stop
8.
Handle
3. Proper use
The tool is designed for drilling with hammer action in
concrete, rock and brick, as well as for chiseling
work, always using the respective correct drill or
chisel bit.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage:
230 V ~ 50Hz
Power input:
1500W
Idling speed:
800 rpm
Blow rate:
3,900 bpm
Drilling capacity in concrete/
stone (max.):
32 mm
Protection class:
II /
Weight:
5.3 kg
