AFTER SALES SUPPORT
1300 922 271
MODEL NUMBER: BT-PG 900, 09/12
8
5. Technical data
Generator:
Digital Inverter
Protection type:
IP23
Continuous rated power P
rated
(S1)
(240V):
900 W
Maximum power P
max
(S2 2 min)
(240 V):
1000 W
Rated voltage U
rated
:
1 x 240V~/1 x 12 V d.c.
Rated current I
rated
:
4 A (240 V) / 6 A (12 V)
Frequency F
rated
:
50 Hz
Drive engine design:
4-stroke, air-cooled
Displacement:
52.6 cm
3
Max. power:
1.04 kW / 1.4 hp
Fuel:
Unleaded
Tank capacity:
2.7 L
Engine oil:
approx 0.25 L
SAE 30
Consumption at 2/3 load:
approx. 0.68 l/h
Weight:
13 kg
Sound pressure level L
pA
:
74 dB(A)
Sound pressure level L
WA
:
94 dB(A)
Power factor cos
ϕ
:
1
Power class:
G1
Max temperature:
40° C
Max. altitude (above sea level):
1000 m
Spark plug:
CR4HSB
Operating mode S1 (continuous operation)
The machine can be continuously operated with the
quoted power output.
Operating mode S2 (temporary operation)
The machine may be temporarily operated with the
quoted power output. Afterwards the machine must
be stopped for a while to prevent it from overheating.
6. Before putting the machine
into operation
Remove the packaging material and check that all items
have been supplied. Place the generator on a firm, flat
surface near the consumer and ensure proper ventilation.
6.1 Electrical safety:
•
Electric supply cables and connected equipment
must be in perfect condition.
•
The generator is to be operated only with
equipment whose voltage specifications conform
with the generator’s output voltage.
Keep all safety regulations and instructions in a
safe place for future use.
Do not lose these safety instructions
3. Layout and items supplied
(Fig. 1-3)
1.
Carry handle
2.
Tank cover with ventilation
3.
Petrol cock
4.
Starter cord
5.
Motor cover
6.
Spark plug cover
7.
ON/OFF switch
8.
Earthing connection
9.
Economy switch
10. 1 x 240V~ socket
11.
1 x 12V DC safety trip
12.
1 x 12V DC connector
13.
Overload indicator
14.
Operating status indicator
15.
Oil warning indicator
16.
Choke lever
17.
Screwdriver handle
18.
Screwdriver insert
19.
Spark plug wrench
20. Adapter cable with 12V socket
21.
Oil filler jug
22. Overload switch
4. Proper use
The unit is designed for applications operated with a
240 V~ and 12 V DC current source. Be sure to
observe the restrictions in the safety instructions.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes
