the vacuum off and remove the plug from the mains
socket.
3.2. Use and care
:
3.2.1. Vacuuming materials
:
3.2.1.1. Ensure the micro particle filer is clean and
dry and installed on top of the dust bin assembly.
3.2.1.2. Ensure that the dust bin assembly is clicked
in its place.
3.2.1.3. Ensure that there are no blockages.
3.2.1.4. Ensure that the hose connections are
securely connected.
3.2.1.5. Turn on the vacuum and start vacuuming.
3.2.1.6. When you have finished vacuuming, turn
the vacuum off and remove the plug from the mains
socket.
3.3. Blockages:
3.3.1. In case of any blockages check the following
in this order:
3.3.1.1. Check the floor tool for any blockages.
3.3.1.2. Check the floor tool hose connector pipe.
3.3.1.3 Check the hose handle pipe.
3.3.1.4 Remove the dust bin and check the dust bin
inlet.
3.3.1.5 If there is still a blockage after following
these steps please contact the manufacturer or its
service agent or a similarly qualified person
3.4. Operating the vacuum:
3.4.1 Assembling your upright:
1. Insert the handle onto the body, then tighten the
screw into the handle and the body.
2. Place the dust container onto the machine and
push until it clicks into place.
3. Insert the handle hose end into the connector
hose and rotate the join clockwise. Then insert the
handle into the other hose of the body.
4. Insert the crevice tool into the machine
