Problem
Possible Cause
Suggested Solutions
“ADD WATER” indicator is on. Lack of Water.
Stop the ice maker, fill water, and press
“ON/OFF” button again to restart the
unit.
“ICE FULL” indicator is on.
Ice is full in basket.
Remove ice from ice basket.
Continuous press “Select” button 5
seconds, the unit could make ice 10
cycles even “Ice” indicator is on.
Ice cubes stick together.
The ice making cycle
is too long.
Stop the ice maker, and restart it when
the ice blocks melt. Select the small
size ice cube selection.
Ice making cycle is normal
but no ice formed.
Room temperature
or water temperature
in inner tank is too
high.
The room temperature should be
10-43
°C
, water temperature should be
8-32
°C.
Refrigerant in cooling
system leaks.
Verify by a qualified technician.
Pipe in the cooling
system is blocked.
Verify by a qualified technician.
997150_IM.indd 5
2018/01/15 11:14:02 AM
5
.
Troubleshooting table.
Water temperature in
inner tank is too low.
Replace the water. Temperature of
water recommended at 8-32
°C
.
