Taurus Light Glamor Video Panel 4096, Руководство пользователя

Страница: 10 / 11

10
connectors or on PCB of the unit or the previous one.
d. Try to use another DMX controller.
e. Check if the DMX cables run near or run alongside to high voltage
cables that may cause damage or interference to DMX interface
circuit.
3. Some units don
’
t respond to the easy controller
a. You may have a break in the DMX cabling.Check the LED for the
response of the master/slave mode signal.
b. Wrong DMX address in the unit .Set the proper address.
4. One of the channels is not working well
a. The stepper motor might be damaged or the cable connected to
the PCB is broken.
b. The motor
’
s drive IC on the PCB might be out of condition
5. Fixture Cleaning
The cleaning of intermal and external optical lenses and/or mirrors
must be carried out periodically to optimize light output.Cleaning
frequency depends on the environment in which the fixture
operates :damp,smoky or particularly dirty surrounding can cause
greater accumulation of dirt on the unit
’
s optics.
a. Clean with soft cloth using normal glass cleaning fluid.
b. Always dry the parts carefully.