Tauras TV2K-TXT, Руководство по обслуживанию, Страница: 4 / 23

fragments will be violently expelled. Use shatterproof goggles and keep picture tube
away from the unprotected body while handling.
3. When replacing a chassis in the cabinet, always be certain that all the protective
devices are put back in place, such as: nonmetallic control; knobs, insulating covers,
shields, isolation resistor-capacitor, network, etc.
4. When replacing parts or circuit boards, disconnect the power cord.
5. When replacing a high voltage resistor (metal oxide resistor) on circuit hoard,
keep the resistor APP. 10mm(1/2 in.) away from circuit board.
6. Connection wires must be kept away from components with high voltage or high
temperature.
7. If any fuse in this TV receiver is blown, replace it with the FUSE specified in the
chassis parts list.
8. The receiver is designed to operate with 230V(50Hz) AC mains.
PRODUCT SAFERY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related
characteristics are often passed unnoticed by a visual inspection and the X-RAY
RADIATON protection afforded by them cannot necessarily be obtained by using
replacement components rated for higher voltage. The use of substitute replacement
parts that do not have the same safety characteristics as specified in the parts list may