Tauras TV2K-TXT Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 23

Tauras TV2K-TXT Скачать руководство пользователя страница 10

B3=Market_France-SECAM L/L’ (0=OFF, 1=ON)

B2=Manual/Auto Cutoff (0=Manual, 1=Auto Cutoff)

B1=Mute pin Low/High To control the speaker (0=Low, 1=High)

B0=TDA7449/TDA7439 (0=TDA7449, 1=TDA7439)

OPTION4:

B4=SCART2 (0=OFF, 1=ON)

B3=RGB (0=OFF, 1=ON)

B2=SVHS (0=OFF, 1=ON)

B1=AV2 (0=OFF, 1=ON)

B0=AV1 (0=OFF, 1=ON)

OPTION5 and ST Ttext is for teletext setting only. It normally could not be changed. If

it

’

s necessary to adjust the OPTION 5, please read the following information before

adjustment.

A.

For CPUs with English, French, German, Polish or English, French, German, Turkish,

Please refer to the setting as below.

1. If OPTION 5 = 00, then the TEXT languages like "ENGLISH, FRENCH, SWEDISH,

TURKISH, GERMAN, PORTUGUESE, ITALIAN, RUMANIAN " can be decoded.

2. If OPTION 5 = 02, then the TEXT languages like "POLISH, FRENCH, ESTONIAN,

CZECH, GERMAN, SERBIAN, LETTISH, RUMANIAN " can be decoded.

3. If OPTION 5 = 04, then the TEXT languages like "ENGLISH, FRENCH, SWEDISH,

CZECH, GERMAN, PORTUGUESE, LETTISH, RUMANIAN " can be decoded.

4. If OPTION 5 = 06, then the TEXT languages ENGLISH, FRENCH, SWEDISH, TURKISH,

GERMAN, PORTUGUESE, LETTISH, RUMANIAN can be decoded.

B. For coming new OTP/CPU with English, Russian, Czech, Polish, the setting of the OPTION

5 will be changed as below.

1. If OPTION 5 = 00, then the TEXT languages like "ENGLISH, FRENCH, SWEDISH,

CZECH, GERMAN, PORTUGUESE, ITALIAN, RUMANIAN " can be decoded.

2. If OPTION 5 = 02, then the TEXT languages like "ENGLISH, RUSSIAN, SWEDISH,

TURKISH, GERMAN, PORTUGUESE, ITALIAN, RUMANIAN " can be decoded.

3. If OPTION 5 = 04, then the TEXT languages like "POLISH, RUSSIAN, SWEDISH,

CZECH, GERMAN, SERBIAN, ITALIAN, RUMANIAN " can be decoded.

«
...
8
9
10
11
12
...
»

Содержание TV2K-TXT
























Отзывы:

Нет отзывов