15
K127MA
MANUFACTURER’S DECLARATION OF INCORPORATION
(in accordance with European Directive 2006/42/EC App. II.B)
Manufacturer:
TAU S.r.l.
Address:
Via E. Fermi, 43
36066 Sandrigo (Vi)
ITALY
Declares
under its sole responsibility, that the product:
Electronic control unit
designed for automatic movement of:
Sliding gates
for use in a:
Residential / Communities / Industrial
complete with:
Radioreceiver and battery charger board
Model:
K127MA
Type:
K127MA
Serial number:
see silver label
Commercial name:
Control panel for one 18V motor with encoder
Has been produced for incorporation on an access point (
sliding gate
) of for assembly with other devices used
to move such an access point, to constitute a machine in accordance with the Machinery Directive 2006/42/EC.
Also declares
that this product complies with the essential safety requirements of the following EEC directives:
- 2006/95/EC Low Voltage Directive
- 2004/108/EC Electromagnetic Compatibility Directive
and, where required, with the Directive:
- 1999/5/CE Radio equipment and telecommunications terminal equipment
Also declares that
it is not permitted to start up the machine
until the machine in which it is incorporated or of
which it will be a component has been identified with the relative declaration of conformity with the provisions of
Directive 2006/42/EC.
The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all information
pertinent to the quasi-machinery.
Sandrigo, 27/11/2014
Legal Representative
_________________________________________
Loris Virgilio Danieli
Name and address of person authorised to draw up all pertinent technical documentation:
Loris Virgilio Danieli - via E. Fermi, 43 - 36066 Sandrigo (Vi) Italy
ENGLISH
