Tatung V26MMFJ, Руководство пользователя, Страница: 8 / 58

2
Contact the Call Centre immediately in any of the following situations. Do NOT
plug in or switch on your display:
•
If the power cable/power supply overheats or is damaged
• If liquid is leaked into the monitor
•
If the LCD display is dropped or the housing damaged
Connecting
Observe the following instructions to connect your LCD display properly:
Power supply
• Do not open the power supply housing. An open housing presents
a lethal hazard from electrical shock. There are no parts inside to
be cleaned or serviced.
•
Operate your LCD display only with grounded outlets with AC 100-240V/ 50-60 Hz. If
you are not sure about the power supply at your location, check with your power
company.
•
Use only the power supply and power connection cable provided.
• For additional safety we recommend use of a surge protector to protect your LCD
display from damage resulting from voltage surges or lightning.
• To remove the LCD display from the power supply, disconnect the plug from the
AC outlet.
•
Where the main plug is used as the disconnect device, the power outlet must be
in the vicinity of your LCD display and within reach of the power cables. DO NOT
stretch the power cables tightly to reach a power outlet.
•
You should arrange the LCD display cables in a manner so that no one can trip
over or step on them.
•
To avoid damage to cable do not place any objects or furniture on the cable.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. If the
provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
Point of use
•
Keep your LCD display and all units connected to it away from moisture and avoid
dust, heat and direct sunlight. Failure to observe these instructions can lead to
malfunctions or damage to the LCD display.
•
Place and operate all units on a stable, level and vibration-free surface in order
to avoid the LCD display from falling.