● Power failure or unstable voltage.
● Abnormal sound or smell from the device.
● AC power cord is damaged.
●
set is damaged due to falling off, knock or
impact.
● Any liquid or foreign matters enter into the
set.
Monitor
Monitor
Under Following Conditions
Turn off the
set immediately,
unplug the power cord from the
power outlet, and contact
authorized maintenance
personnel.
Monitor
●
If coal gas or other flammable gases leak, do not unplug the power cord of the
set or other
electric appliances; instead, close the valve of the gas immediately and open the doors and windows.
Monitor
●
100-
AC
●
This
must be connected to a three pin socket outlet for safety.
● All cables can be connected or pull out only after power supply is turned off.
● Do not fix the
set on instable position, or else it may cause falling off, damage, or
even fire.
● Do not put the
set in the environment:
1. With direct sunshine, moisture, overheating, undercooling or heavy dust;
2. With flammable or explosive substance;
3. With flammable or corrosive gas;
4. In bathroom, kitchen, etc.
● Do not use damaged or improper power socket, and ensure that the plug and socket are
connected properly.
● Keep the power plug and socket free of dust and metal pieces.
● Do not damage the power cord:
1. It is prohibited to refit the power cord;
2. Do not put heavy object on the power cord;
3. Keep the power cord away from heat source;
4. Do not drag the power cord when unplugging.
● Do not connect too many appliances to one power strip, or else it may cause fire due to high
power consumption.
● Do not let open flame (e.g. lit candle) approach the
set, or else it may cause electric
shock or fire.
● Do not put the container filled with water on the
set, to avoid electric shock or fire
caused by water drop of splashing.
● Do not penetrate any sharp object, metal or liquid into the signal connector or air vents, to
avoid short circuit and product damage as well as electric shock.
● The slots on the case is designed to release heat so as to assure that all inside components
will not reach an extra high temperature and can work normally for a long time. Please do not
cover the holes while place it.
Only use
240V
60/50Hz power supply.
Monitor
Monitor
Monitor
Monitor
Monitor
Warning
2
Do not disassemble the
set by yourself, or else it may cause electric shock or fire.
Contact qualified personnel for maintenance.
Monitor
Do not turn on the
set in thunderstorm weather; unplug the power plug avoid
lightning strike.
Monitor
Do not touch the plug with wet hands, or else it may cause electric shock.
Safety warning and notice