TATU PD PLUS Скачать руководство пользователя страница 47

Страница: 47 / 130

PD / PCA / PCA PLUS - Rev. 01 - Jun/22

5. Assembly

- Tractor models:

• New Holland: 75 / 85 / 95;
• New Holland: 5.80 / 5.90 / 5.100;
• Case Farmall: 80 / 90 / 100.

New Holland and Case Farmall frames assembly

1. Assemble the right (01) and left frames to the right fixation bar (04) and to the left

one using bolts (11), flat washers. spring washers and nuts without totally tightening

them.

2. Fasten the central fixation shim (05) to the frame (01) and to the tractor side using

bushings, bolts (12) and spring washers.

3. Fasten the stop (09) between the frame (01) and the tractor using bolts (13) and

spring washers.

4. On the front part of the frame, fasten it to the tractor engine using bushings, bolts

(14) and spring washers.

5. Tighten all parts simultaneously.

- The fixation system may change due to the tractor model.

NOTE

Содержание PD PLUS



































































































































Результаты поиска

Содержание PD PLUS

Отзывы:

Похожие инструкции для PD PLUS

Бренды по названию

Популярные бренды

TATU PD PLUS, Руководство оператора

Результаты поиска

Содержание PD PLUS

Отзывы:

Похожие инструкции для PD PLUS

Бренды по названию

Популярные бренды