TATU PD PLUS Скачать руководство пользователя страница 27

Страница: 27 / 130

PD / PCA / PCA PLUS - Rev. 01 - Jun/22

5. Assembly

Valtra frame assembly

- Tractor models:

• Valtra: A750 / 850 / 950.

1. Assemble the right side (01) and left side frames to the right (03) and left bars using

bolts (14), spring washers and nuts without totally tightening them.

2. Fasten the stop (04) on the inner part of the frame (01) using bolts (15), spring

washers and nuts.

3. Fasten the outer shim (06) to the frame (01) and to the tractor engine using bolts

(18) and spring washers.

4. On the side of the tractor, between the frame (01) and the engine, fasten the shim

(05) using bolts (16) and spring washers.

5. On the upper part of the frame, couple the front protection (07) using bolts (13),

spring washers and nuts.

6. Fasten the rear fixation bar (03) to the tractor using a bolt (17), flat washer and nut.
7. Tighten all parts simultaneously.

- The fixation system may change due to the tractor model.

NOTE

Содержание PD PLUS



































































































































Результаты поиска

Содержание PD PLUS

Отзывы:

Похожие инструкции для PD PLUS

Бренды по названию

Популярные бренды

TATU PD PLUS, Руководство оператора

Результаты поиска

Содержание PD PLUS

Отзывы:

Похожие инструкции для PD PLUS

Бренды по названию

Популярные бренды