58
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GAPCR-HD 8013/GASPCR-HD 9017/GASPCR-EHD 10020
Set-up instructions
The following instructions must be carefully observed to get the best working
performance.
Preparing the tractor
The addition of water ballasts in the tires and a set of weights on the front part and
rear wheels of the tractor are the most used ways to increase the soil traction and give
greater stability to the tractor. Check if the tractor is in full conditions before using it.
Hitching to the tractor
ATTENTION
Couple the hitch (A) to the tractor drawbar and lock using an axle (B) and cotter pin.
Use the most suitable bushings (C) for the axle (B) that is going to be used on the hitch.
Note that the drawbar is centralized on the tractor. To facilitate hitching, use the parking
jack adjustment (D). Right after, place the safety chain (E).
Couple the hoses (F) to the outlet ports. To do so, shut down the tractor engine,
relieve the control valve pressure by activating the lever a couple times and check if the
quick couplers are clean.
Before activating the hydraulic command to lower or lift the tires,
check if there are no people close to the disk harrow, especially near
the drawbar.
Do not allow that people or animals get closer.
Never release or remove the hoses without relieving the control valve
pressure first.
F
F
E
E
D
D
A
A
B
B
C
C
NOTE The axle (B) and cotter pin are not included
with the equipment.
