Tatu Marchesan RC2E 4500, Инструкция по эксплуатации

Страница: 33 / 36

31
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RC²E 4500
Maintenance
• Check the average length of the compression springs (D) before disassembling them.
• Disassemble and sand the metallic parts that are attached to the discs.
• Being the clutch disassembled, the discs must swing freely between the metallic
parts.
• Replace the discs (B) when their thickness get to 1.5 millimeters .
• After this procedure, assemble the clutch again.
• The compression springs (D) length must be adjusted to 28 mm .
• If the clutch swing freely in a normal working operation after the maintenance, tight
the nuts (C) from the compression springs until this occurence do not happen anymore.
Item Description Quantity
01 Front flange 1
02 Central flange 1
03 Rear flange 1
04 Clutch outer coating 1
05 Clutch inner coating 1
06 1/2 x 3.1/2 bolt 8
07 Spring 8
08 Flat washer 8
09 Self locking nut 8
10 1/2 x 2.3/4 bolt 2
11 Spring washer 2
12 1/2 nut 2
09
02
07
01
04
03
06
10
05
11
12
08