13
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RC²E 4500
Working preparation
Hitching to the tractor
For hitching, choose a place as flat as possible.
1
º
) Traction bar
If it is possible, keep the traction bar in the shortest position during working.
• Couple the rotary cutter to the traction bar using a hitch pin and cotter pin. If necessary,
use the hydraulic jack (A), which has an adjustment to lift or descend the drawbar in order
to facilitate the hitching.
• The rotary cutter must be coupled to the traction bar of the tractor, as shown
in the figure above.
• After doing this process, remove the hydraulic jack (A) and lock it on the
frame, as shown below.
NOTE
A
A
Right
Wrong
A
