manualshive.com logo in svg

Tatu Marchesan RC2 2600 CL, Руководство оператора, Страница: 3 / 52

Поделиться
Скачать
Tatu Marchesan RC2 2600 CL Скачать руководство пользователя страница 3

1

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

RC² 2600 CL / RC² 2600 LSL / RC² 3100 CL

Introduction

The RC² 2600 CL, RC² 2600 LSL and RC² 3100 CL models 

perform mowing jobs with higher yield and superior quality.

These rotary cutters are used for citrus orchards cultivation 

or similar to eliminate stubbles and also to provide services that 

need a great speed to execute.

The RC² 2600 CL and RC² 3100 CL models work in a central 

or lateral position related to the tractor center; the RC² 2600 LSL 

model works in a lateral or super lateral position. All these models 

work under the tree canopies to completely clean the orchards.

The rotary cutters are supplied with four reversible 

DUROMARK blades (double cut), which are heat-treated and 

offer a greater durability.

This operator's manual contains the necessary information 

for the best performance of this rotary cutter. The operator must 

carefully read the entire manual before working with the equipment. 

Also, read and understand the safety recommendations.

For any further clarification or in the event of technical 

problems that may arise during the service, consult your dealer 

and the Technical Support department of the factory. They can 

ensure the fully functioning of your TATU rotary cutter.

Содержание RC2 2600 CL





















































Отзывы:

Нет отзывов