manualshive.com logo in svg

Tatu Marchesan RC2 2600 CL, Руководство оператора, Страница: 29 / 52

Поделиться
Скачать
Tatu Marchesan RC2 2600 CL Скачать руководство пользователя страница 29

27

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

RC² 2600 CL / RC² 2600 LSL / RC² 3100 CL

Set-up instructions

NOTE • The lower lifting bar (C) must be free so the equipment can move.

•  Before coupling the equipment to the tractor, check the holes on the drawbar. 

According to the tractor model, connect the hydraulic arm (C) on the upper 

or lower hole to level the equipment.

D

D

B

B

C

C

A

A

Longitudinal leveling

Use the length variation of the third-point arm (A) to adjust the longitudinal leveling, 

so it is possible to level or unlevel the front part of the equipment related to the rear part 

and vice-versa.

The more stretched is the third-point (A), the lower will be the rear part of the 

equipment.

The more retreated is the third-point (A), the higher will be the action on the front part 

of the equipment.

Use the stabilizer bars (B) from the lower lifting bars (C) to centralize or de-centralize 

the equipment related to the tractor.

Carry out the adjustments on a flat place, being the equipment properly coupled to 

the tractor.

Couple the rotary cutter through the third-point arm (A) and intermediate bar (D).

Содержание RC2 2600 CL





















































Отзывы:

Нет отзывов