9
OPERATION
GB
1.3
units of measurement
note
all measurements are given in mm unless stated otherwise.
2
safety
2.1
intended use
The appliance is intended for heating domestic hot water and can supply one or more draw-off points.
This appliance is designed for domestic use. It can be used safely by untrained persons. The appliance can
also be used in a non-domestic environment, e.g. in a small business, as long as it is used in the same way.
Any other use beyond that described shall be deemed inappropriate. It is not permissible to heat other
liquids or materials. Observation of these instructions and of instructions for any accessories used is also
part of the correct use of this appliance.
2.2
Safety instructions
danGer Scalding
During operation, the tap and safety assembly can reach temperatures in excess of 60 °C.
There is a risk of scalding at outlet temperatures in excess of 43 °C.
!
WarninG injury
the appliance may be used by children aged 8 and up and persons with reduced physical,
sensory or mental capabilities or a lack of experience provided that they are supervised
or they have been instructed on how to use the appliance safely and have understood the
resulting risks. children must never play with the appliance. children must never clean
the appliance or perform user maintenance unless they are supervised.
!
damage to the appliance and environment
protect the water lines and the safety assembly against frost.
note
the appliance is under pressure. during the heat-up process, expansion water will drip
from the safety valve. if water continues to drip when the heat-up process is completed,
and if the water pressure is lower than 0.6 mpa, please inform your heating contractor.
2.3
ce designation
The CE designation shows that the appliance meets all essential requirements according to the:
-
Electromagnetic Compatibility Directive
-
Low Voltage Directive
2.4
test symbols
See type plate on the appliance.
3
aPPlianCe desCriPtiOn
The appliance electrically heats up domestic hot water with the standard heating output or with rapid
heating. The electronic control unit makes energy saving adjustments easier. Subject to the power supply
and draw-off behaviour, the water is heated automatically to the set temperature.
The digital display provides you with information about the selected set temperature and the enabled
functions.
The current temperature standard value is provided by the analogue temperature indicator.
The inner cylinder is protected against corrosion by an enamel coating in conjunction with the integral
protective magnesium anode.
