Tate SmartAire MZ Basic, Руководство по установке пользователя, Страница: 5 / 26

User Installation Manual
r1.9-3/11/15
SmartAire
®
MZ
7510 Montevideo Road © 2014 Tate Access Floors, Inc.
Jessup, MD 20794
Tel (410)799-4200 5 of 26
INCLUDED COMPONENTS

SmartAire MZ (x1)

16’ Temperature Sensors (x4)

Battery Backup system (x1)

Installation Guide

Black Zip ties (x10)
ADDITIONAL REQUIRED COMPONENTS

Tate DirectAire® Al or Tate DirectAire® (x1)

5x5mm Aluminum DirectAire® Screws (x4) or Steel DirectAire® Hangers (x2)

Power and Networking Cable (Plenum Rated Ethernet CAT5) (x1)

POE Capable Switch (IEEE 802.3af compliant) or POE Injector Module (IEEE 802.3af compliant) (x1):
Property IEEE 802.3af
Power available at PD 12.95 W
Maximum power delivered by PSE 15.40 W
Voltage range (at PSE) 44.0
–
57.0 V
Voltage range (at PD)
37.0
–
57.0 V
Maximum current
350 mA
Maximum cable resistance
20 Ω
(Category 3)
Power management
Three power class levels negotiated at initial connection
Derating of maximum cable ambient operating temperature None
Supported cabling Category 3 and Category 5
Supported modes Mode A (endspan), Mode B (midspan)
REQUIRED TOOLS

Manual Philips Head Screw Driver
ADDITIONAL NOTES

It is recommended for installations with multiple SmartAire MZ units the MAC Address label (on side of
unit) and physical installation location is recorded during unpacking and installation. This will assist in
later coordinating the unit through the network connection.