SAFETY INSTRUCTIONS
12
Installation Instructions
1. Turn-off the main water supply before accessing the nipple for connecting the
Kitchen Faucet Adaptor (KFA). Use Teflon tape on the threads of the Kitchen
Faucet Adaptor to connect the pipe. Insert the KFA into the plumbing line and
ensure threads are tightened. Depending on the plumbing connection, close the
front end of the KFA using a tap. Insert the inlet pipe in the KFA in the push-fit Side.
Double press the pipe to ensure leak-proof connection.
2. Open the front cover of the purifier by rotating the tap counter clockwise.
3. Take out both the GAC cartridges one-by-one and use the pipe attached to the
KFA to flush with water for 30 sec. After flushing, connect both GAC back in to the
system.
4. Connect the pipe to the inlet marked on the purifier. In case you choose to install
an additional pre-filter (available at an additional cost), connect pipe to inlet of this
pre-filter and connect the outlet of pre-filter to the inlet of purifier.
5. Dry RO membrane comes sealed in a pack (and not pre-fitted) with your system
to maximize shelf life. Unpack and install the RO membrane.
6. Plug in the power supply and check for any leakages from any of the connectors or
pipes. If leakage, then refit. If there is no leakage, close the front cover of the
purifier.
7. Wait for a few minutes for the system to autoflush and then start filling the
concealed storage tank.
8. Drain out first 15 to 20 liters of purified water from the storage tank.
Your Tata Swach Nova Silver RO is now ready for use. Familiarize your family
members with operation and maintenance of the system.
If away from home:
If the purifier is not going to be used for more than 2 weeks, shut off the system and
drain the stored water.
9
Electrical Safety
These safety instructions must be read carefully to ensure your safety and prevent
property damage.
