6. The length of the water inlet hose must be shorter than 2 meters to ensure
sufficient pressure is available to the machine.
7. Always connect with cold/normal water inlet only. Do not use with hot water.
8. Do not confine water purifier in a cabinet
9. Input water pressure needs to be between 5 PSI and 35 PSI. In case it is more
than35 PSI, you need to use a pressure reducing valve and in case it is less than 5
PSI, you need to use a pressure booster pump . Either can be bought from the
market or from the Company technician at an additional cost.
10. Inlet water TDS should not exceed 2000 ppm. Hardness should not exceed
500 ppm.
11. Ensure the inlet and drain connections are properly connected and that the drain
point is not blocked.
12. Avoid sharp bends in the connecting pipes ensuring inlet pipe and reject
water pipe has free water flow path.
13. Avoid direct exposure to sunlight or humidity and ensure sufficient ventilation
14. Ensure waste/reject water pipe is connected to a drain point and water from
reject water pipe is never consumed.
INSTALLATION INSTRUCTIONS
11
PLEASE ENSURE THAT YOUR TATA SWACH NOVA SILVER RO PURIFIER IS
INSTALLED BY A TATA SWACH TECHNICIAN ONLY
Pre-Installation Requisites
1. 220V Single phase AC connection not more than 1.5m away from the point of
installation of purifier. The wire length supplied with the system is 1.5m
2. Raw water supply with ½ nipple not more than 2m away
3. Drain for rejected water not more than 2m away
4. Space on the wall as per dimensions of the purifier
5. Wall/plane surface for mounting two screws and holding the machine.
8
