BELT TENSION ADJUSTMENT
Fan belt tension adjustment
Check the conditions of belts on the engine. Examine the
edge of the belt for cracks or fraying.
Check the tension of the belt by pushing on it with your
thumb for A.C. compressor belt and Alternator / Power
V E H I C L E M A I N T E N A N C E
Steering belt as shown in schematic diagram.
The belts should have deflection of 8 to 10 mm.
If the belt tension is not proper, get it attended at the nearest
Authorised service outlet.
Belt Arrangement - Engine with AC compressor
and power steering pump
AC BELT TENSION
ADJUSTMENT NUT
ALTERNATOR
BELT TENSION
ADJUSTMENT NUT
Belt Arrangement - Engine with AC compressor
and without power steering pump
VIBRATION DAMPER
PULLEY
TENSIONER
POWER STEERING
PUMP PULLEY
ALTERNATOR
PULLEY
TENSION
ADJUSTMENT
BOLT
FAN PULLEY
A.C. COMPRESSOR
PULLEY
TENSIONER
TENSIONER
A.C. COMPRESSOR
PULLEY
VIBRATION DAMPER PULLEY
ALTERNATOR
PULLEY
FAN PULLEY
TENSION
ADJUSTMENT
BOLT
64
65
V E H I C L E M A I N T E N A N C E
Bleeding clutch system
A dry friction, single disc, diaphragm type clutch has been fitted
which is actuated hydraulically.
The procedure for bleeding the system is as follows :
a.
Ensure that fluid level in clutch fluid container is upto
maximum level.
b.
Remove dust cap from slave cylinder bleed screw and clean
the screw thoroughly. Attach bleeding tube to bleed screw
and place other end of tube in a clean glass jar containing
sufficient clutch fluid to submerge tube end.
c.
Pump clutch pedal twice or thrice slowly throughout its
stroke and by holding clutch pedal in depressed condition,
loosen bleed screw on slave cylinder, Watch for air bubbles in
glass jar.
d.
Retighten bleed screw on slave cylinder and repeat the
process until air bubbles cease to appear at the end of tube in
glass jar, allowing only fluid to flow.
e.
After completing bleeding operation, ensure that bleed
screw on slave cylinder is fully tightened. Replace dust cap on
the bleed screw.
During bleeding process keep a watch on fluid level in
container and top-up.
Clutch Fluid Container
Bleeding clutch slave cylinder
Bleeding clutch slave cylinder
BLEEDING CLUTCH SYSTEM
Ofrecido por www.electromanuales.com