TATA Motors Safari 2.2 VTT Dicor, Руководство пользователя

Страница: 121 / 172

111
TRANSFER CASE OIL
Checking Oil Level of Transfer Case
NOTICE
Before checking or removing the oil, warming up of the transfer
case is necessary. This should be done by driving the vehicle for
some time in 4x4 mode.
Checking of Oil levels
1. Clean the oil level plug and surrounding area.
2. Remove the oil level plug and check whether oil is dripping out.
3. If oil is not dripping out, oil level must be below the required
level. Add oil to bring it to the level when it starts dripping out.
4. Tighten oil level plug. Tightening torque of oil level plug is 2 to
3 mkg.
Changing of Transfer Case Oil
1. Clean the oil level plug, drain plug and surrounding area.
2. Place a container to collect oil, under transfer case.
3. Remove the drain plug and let the oil drain out.
4. Remove the oil level plug.
5. Tighten oil drain plug and fill new recommended oil through oil
level plug, till it begins to drip out.
6. Tighten oil level plug. Tightening torque of oil drain plug is 2 to 3 mkg.
1. Transfer case Oil Filler Plug / Level Plug
2. Transfer case Oil Drain Plug
1
2
M A I N T E N A N C E