TATA Motors Indica V2 LEi, Руководство владельца и сервисная книжка, Страница: 109 / 148

108
MAINTENANCE & CAR CARE Electricals
Head Lamp Bulb Replacement :
•
Switch 'OFF' the head lamps & ensure that the bulb is not hot.
•
Open the bonnet and remove the lamp connector from the head
lamp bulb.
•
Remove rubber cap. Unlock the locking clip and take out the bulb
from the holder. This should be done carefully, otherwise it may
lead to breakage of the bulb holder / holding clip.
•
Note the instructions on the bulb carton.
Replace the bulb with a new one of the same type with right
orientation in the holder.
•
Lock the clip, fit the rubber cap and fix the connector.
•
Switch 'ON' the head lamps and check the lighting.
Do not clean or touch the head lamp reflector as it will damage
the mirror finish of the surface.
The horizontal and vertical adjustment screws are located on the back
of the reflector.
Precise adjustment can be carried out only in the authorised workshops.
When replacing the head lamp bulb, handle it by gripping the cap.
Protect the glass from contact with your skin or hard object. If you
touch the glass, clean it with spirit & a clean cloth. After replacement
of the bulb in any emergency get the head lamp adjustment done at
an Authorised Service outlet at the earliest.
Halogen head lamp bulbs get very hot when illuminated. Oil,
perspiration or a scratch on the glass can cause the bulb to
break due to the heat.
1. Head Lamp Adjustment Screw
2. Head Lamp Adjustment Screw
3. Side Indicator Bulb
4. Rubber Cap
5. Head Lamp Bulb
4
1 2
5 3