TATA Motors CHECK ExpressPCR, Руководство пользователя

Страница: 7 / 62

7
Connect one end of the Ethernet cable to the
instrument and the other end to a LAN port, or
directly to your computer. Once your ExpressPCR
is connected to a LAN, you can connect to your
instrument via Wi-Fi if your network supports it.
POWERING ON YOUR
EXPRESSPCR SYSTEM
Place the ExpressPCR on your lab bench, and then
connect AC power to the power supply unit. Your
instrument will now turn on after a few seconds. The
display LEDs will light up blue, and then turn green
if a lid is closed or red if not. Your ExpressPCR is
ready to run. ExpressPCR instrument uses a 3-pin
IEC mains connector. If you are not using an earthed
supply then you must provide an additional earth
connection.
CONNECTING YOUR
EXPRESSPCR
TO A N E T WO R K , P C O R L A P TO P
A summary of these connections is shown on the
following page...