4
WARNING
● Never modify this rotisserie as damage and injury may occur, and this will void your warranty.
● Read and understand all instructions.
● DO NOT touch hot surfaces. Use handles or knobs.
● The use of accessory attachments is not recommended by the appliance manufacturer as it may
cause injuries.
● Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
● DO NOT use this appliance for anything other than intended use.
● Only connect this rotisserie to 240V AC power.
● Check for damaged parts before operating this rotisserie.
● Do not touch any hot components.
● Ensure work area is clear of clutter and possible trip dangers.
● Never wear loose clothing which could get caught in moving parts.
● Long hair should be contained so it can not get caught in moving parts.
● Never yank or pull the power cord to disconnect it from the mains supply socket-outlet.
● Never carry the rotisserie by its power cord.
● Keep power cord away from heat, oil, solvents and sharp edges.
● Check power cord for signs of damage before each use. If damaged do not use.
● Power cord must only be replaced by an authorised service facility.
● To clean rotisserie only use a damp soft cloth, never use liquid or solvents of any type.
● Ensure rotisserie is disconnected when not in use and before servicing, making adjustments or
when changing any accessories.
● Ensure rotisserie is turned off before connecting to the mains power supply.
● Only use an extension cord intended and marked “outdoor” use.
● Only use a ‘3’ core (earth pin) extension cord with this rotisserie.
● DO NOT clean the spit motor while it is on or plugged into the mains power supply.
● Always switch ‘OFF’ and unplug before cleaning.
● DO NOT spray water or any liquid into the spit motor.
● Repairs should only be carried out by qualified persons using original spare parts. Failure to do
so may result in
considerable danger to the operator.
● Ensure the ‘outdoor’ extension cord is not placed across walkways so that it is not a trip hazard.
● Do not use in damp or wet conditions or in extreme winds.
● Always ensure that the power cord is fully extended and NOT in contact with any part of the spit.
● Never use the motor if any part of it is damaged.
● Do not attempt to modify the motor, power cord or power plug in any way.
● This product is fitted with a sealed electrical connection plug that is compatible the mains supply
for the UK and
meets the requirements of international standards. It must be connected to a supply voltage
that is equal to that
stated on the rating label. If the mains connection plug or power cord becomes damaged it
must be replaced with a complete assembly that is identical to the original, and this must be
replaced by an authorised service centre. Always follow the UK requirements for connection to
the mains supply. If in doubt always consult a qualified electrician.
Содержание KYQ-C001
Страница 2: ...2...
Страница 7: ...7 4 5 Ref 1 Ref 9 10 11 12 Ref 16 17 18 Ref 15 Ref 16 17 18...
Страница 8: ...8 6 7 Ref 14 Ref 13 Ref 5 Ref 4 Ref 5 Ref 2 3 Ref 6 7 8...